12"e; x 12"e; x 1/8"e;
TEXTURED ONE SIDE, SCORED ON BACK.
USE TO MAKE SPEAKER ADAPTERS + CUSTOM DASH APPLICATIONS
SIMILAR TO NF1000

4-10 GA. INLINE ANL FUSE HOLDER
SEE THRU CLEAR PLASTIC HOUSING
ACCEPTS ANL TYPE FUSE
ACCEPTS UP TO 4 GA. WIRE
SET SCREW DESIGN

*** THE CHAMBERS ARE NOT DIVIDED ***
*Has outer carton*
THERE IS 1 SLOT PORT + THE CHAMBERS ARE CONNECTED BEHIND THE PORT.
32"e;x12"e;x14.75"e;
5/8"e; MDF
3"e;x10.75"e; PORT x 9.5"e; DEEP
AIR SPACE = 2.2 CU. OVERALL

IS UPS SHIPPABLE

*** THE CHAMBERS ARE NOT DIVIDED *** THERE IS 1 SLOT PORT IN THE
CENTER + THE CHAMBERS ARE CONNECTED BEHIND THE PORT.
*Has outer carton*
36 L "e;x16 W"e;x 14"e; H
5/8"e; MDF CONSTRUCTION
3"e;x11.75"e; PORT x 11"e; DEEP
AIR SPACE = 3.2 CU. FT. OVERALL (1.74 PER CHAMBER)

IS UPS SHIPPABLE

*Has outer carton*
5/8"e; MDF CONSTRUCTION
1 TERMINAL CUP - 3 SEALED CHAMBERS
35"e; WIDE x 15"e; DEEP. IT IS 12"e; HIGH @ ENDS + 20.25"e; HIGH @ CENTER.
1.87 CU. FT. / WOOFER)

IS UPS SHIPPABLE

*Has outer carton*
38 WIDE, 16 1/2 HIGH, 18 1/4 DEEP (NOMINAL 38"e; x 16.25"e; x 18.25"e;)
5/8"e; MDF CONSTRUCTION W/CHARCOAL CARPET
3"e;x15"e; PORT x 14"e; DEEP W/3"e; GAP BETWEEN END OF PORT + BACK OF BOX.
2.69 CUBIC FEET PER CHAMBER
4.6 CU. FT. OVERALL

IS UPS SHIPPABLE BUT THERE IS AN EXTRA CHARGE FOR OVERSIZED CARTON

COMMONLY USED TO REPLACE FUSES IN AMPLIFIERS

*Has outer carton*
SINGLE 10"e; EMPTY WOOFER BOX - SQUARE W/SIDE FRONT SLOT PORT
16"e;W x 12"e;H x 14 1/4"e; D
2"e;x10 3/4"e; PORT x 10 3/4"e; DEEP
5/8"e; MDF CHARCOAL CARPET
AIR SPACE = 1.1 CU. FT.

IS UPS SHIPPABLE

SINGLE 12"e; EMPTY WOOFER BOX - SQUARE W/ FRONT SLOT PORT
5/8"e; MDF CHARCOAL CARPET
17 3/4"e; WIDE x 13 1/4"e; HIGH x 16 1/4"e; DEEP 1.65 CUBIC FT.
PORT 2"e;x11.75"e;x12.5"e; LONG
AIR SPACE = 1.5 CU. FT.

SINGLE 15"e; EMPTY WOOFER BOX W/ FRONT SLOT PORT
5/8"e;MDF
21"e;W x 16.25"e;H x 18"e;D
2.7 CUBIC FT. AIR SPACE
PORT: 2"e;x15"e; x 15.75"e; LONG

1/2"e; RISER FOR 6 1/2"e; SPEAKERS (PAIR)

5/8"e; MDF
20"e; WIDE x 15"e; HIGH x 5"e; TOP + 7.5"e; BOTTOM DEPTH
1 PAIR/BOX - BOTH WAREHOUSES - 12-22-2004
WOOFER MOUNTING DEPTH: 5.5"e;
AIR SPACE = .88 CU. FT. PER CHAMBER

5/8"e; MDF
20"e; WIDE x 15"e; HIGH x 5"e; TOP + 7.5"e; BOTTOM DEPTH
0.75 CU. FT. / CHAMBER

This interface provides Vehicle Speed Sense (VSS) parking brake and a reverse wire output for an aftermarket radio with navigation. ABS plastic copper vinyl and aluminum materials ensure long-lasting durability.

Feature:

• Amplified non-amplified interface harness
• Retains accessory power and provides navigation output wires
• Provides 12-V DC accessory output
• Does not retain warning chimes

Double DIN Radio Installation Dash Kit for select 2003 to 2008 Toyota Corolla vehicles allows you to install a double DIN |4in tall| aftermarket radio into your vehicles dash opening. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit. Painted to match factory dash color and factory matched texture style. High grade ABS plastic construction.

Feature:

• For Double-DIN Radios or Two Single-DIN Radios
• High-Grade ABS Plastic Contoured Textured and Painted
• All Necessary Hardware for Easy Installation
• Comprehensive Instruction Manual

Double DIN Radio Installation Dash Kit with Pocket for select 2003 to 2006 Cadillac CTS|SRX vehicles allows you to install a Double DIN aftermarket radio or 2 Single DIN aftermarket radios into your vehicles dash opening. The interchangeable design allows DIN opening to be above or below the pocket. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit.

Feature:

• Manufactured from OEM quality ABS plastic
• DIN radio provision with pocket
• Double DIN radio provision
• Paint and texture to match factory dash
• High-Grade ABS Plastic Contoured & Textured to Compliment Factory Dash
• Comprehensive Instruction Manual
• All Necessary Hardware for Easy Installation

This non-amplified interface wiring harness for select 2006 to 2008 Chrysler vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Retains RAP if equipped
• Designed for non-amplified systems
• Provides accessory power (12-volt 10-amp)
• Micro B USB updatable

This non-amplified interface wiring harness for select 2006 to 2008 Chrysler vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Retains RAP if equipped
• Designed for non-amplified systems
• Provides accessory power (12-volt 10-amp)
• Micro B USB updatable

This Non-amplified non Onstar Interface wiring harness for select 2004 and up GM vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Provides VSS parking brake and reverse outputs
• Retains accessory power and provides navigation output wires
• Provides 12-V DC accessory output
• Does not retain warning chimes

Radio Installation Dash Kit with Pocket for select 2005 to 2009 Mercedes SLK Series vehicles allows you to install a double DIN radio 2 stacked single DIN radios or a single DIN radio with a storage pocket into your vehicles dash opening. Features patented Snap-In ISO support mount system with custom trim ring and includes storage pocket for mounting under single DIN radio. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit.

Feature:

• Manufactured from OEM quality ABS plastic
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Stacked ISO mount units provision

This non-amplified non Onstar interface wiring harness for select 2000 and up GM CL2 vehicles allows you to install an aftermarket car stereo and retain accessory power and also provides navigation output wires 12V DC accessory output VSS parking brake and reverse outputs.

Feature:

• For the replacement of an OEM radio with an aftermarket unit
• Retains accessory power and provides navigation output wires
• Provides 12-V DC accessory output
• Provides VSS parking brake and reverse outputs

Axxess AXDIS-LR92 Radio Replacement Interface Steering Wheel Control Retention for Select Land Rover 04-09 Discovery Range Rover Sport Vehicles. Provides NAV output when installing a navigation multimedia radio. The multimedia interface will also retain the MOST 25 amplifiers.

Feature:

• Provides accessory power
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake reverse speed sense)
• Micro-B USB updatable

Wiring Harness for select 2006 and up Chevrolet HHR vehicles without OnStar allows for the installation of an aftermarket radio using the existing factory wiring and connectors. Plugs into car harness at radio. Accessory power not provided by this harness and all of the factory warning chimes will no longer function.

Feature:

• For Models without OnStar
• Plugs into Car Harness
• Power/4-Speaker
• No accessory power provided warning chimes lost

This non-amplified Interface wiring harness for select 2006 to 2010 Ford vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface allows USB updates and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Non-amplified interface harness
• Retains accessory power and provides navigation output wires
• Provides 12-V DC accessory output
• Does not retain warning chimes
• Provides VSS Parking Brake and Reverse Outputs

This non-amplified Interface wiring harness for select 2006 to 2010 Ford vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug-in for the Universal Steering Wheel Control Interface allows USB updates and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier.

Feature:

• Non-amplified interface harness
• Retains accessory power and provides navigation output wires
• Provides 12-V DC accessory output
• Does not retain warning chimes

Install an aftermarket radio with navigation functionality using this handy installation kit that's designed for use with 2006 and later Ford vehicles. Wires are provided for VSS reverse and parking break to cut down on installation time.

Feature:

• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (Retained Accessory Power) if equipped
• Provides Navigation Outputs reverse VSS parking brake
• ASWC harness included (ASWC not included)