This 18 foot super mini-8 CB antenna cable has a removable FME style connector. For more custom installation a smaller hole will need to be drilled. 95% shielded design protects from loss of signal for increased performance. Molded ends protect from moisture dust and corrosion.

Feature:

• Removable FME style connector
• Weatherproof
• 95% shielded design protects from loss of signal for increased performance
• Molded ends for moisture dust and corrosion protection
• Weatherproof Boot

This 18 foot super mini-8 CB Antenna Cable has a stranded center conductor and soldered PL-259 connectors. 95% shielded design protects from loss of signal for increased performance. Molded ends protect against moisture dust and corrosion.

Feature:

• 18 foot super mini-8 CB antenna cable with stranded center conductor
• Soldered PL-259 connectors
• 95% shielded design protects from loss of signal for increased performance
• Molded ends for moisture dust and corrosion protection
• Weatherproof Boot

The 2-foot Superflex 500-watt fiberglass antenna whip has 180-degree whip action capability and a Superflex quarter-inch fiberglass rod. The whip is tunable with a top loaded coil 1/4 inch wavelength design and Mil-Spec polyolefin sheath. It can be used as a single or co-phased antenna. Designed for CB and 10-meter radios.

Feature:

• 180 degree whip action capability
• Superflex quarter-inch fiberglass rod
• Designed for CB and 10 Meter Radios
• Frequency Range 26-30MHz
• Designed for CB and 10 Meter Radios
• 1/4 Wave Length Design
• Fits All 3/8 .in x 24 Threaded Mounts
• Chrome Plated Whip Adapter
• Mil-Spec Polyolefin Sheath

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inch overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• Black double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inches in overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• Orange double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inch overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• White double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 3-foot Superflex 1000-watt fiberglass antenna whip has 180-degree whip action capability and a Superflex quarter-inch fiberglass rod. The whip is tunable with a top loaded coil 1/4 wavelength design and Mil-Spec polyolefin sheath. It can be used as a single or co-phased antenna. Designed for CB and 10-meter radios.

Feature:

• 180 degree whip action capability
• Superflex quarter-inch fiberglass rod
• Designed for CB and 10 Meter Radios
• Frequency Range 26-30MHz
• Designed for CB and 10 Meter Radios
• 1/4 Wave Length Design
• Fits All 3/8 .in x 24 Threaded Mounts
• Chrome Plated Whip Adapter
• Mil-Spec Polyolefin Sheath

This 3-foot top-loaded coil 2500-watt replacement whip antenna has a black fade-resistant polyethylene jacket and heavy-duty 16-gauge wire. It handles up to 2500 watts and has a frequency range of 26MHz-30MHz. Also featuring a weather-band ready tunable PowerPlus tip and non-corrosive chrome-plated stainless steel hardware with brass ferrule. It can be used as a single or co-phase for dual antennas. Designed for CB and 10-meter radios.

Feature:

• Black fade resistant polyethylene jacket replacement whip
• Handles up to 2500 watts
• Heavy-duty 16-gauge wire
• Can be used as a single or co-phase for dual antennas
• Weather-Band Ready
• Tunable PowerPlus Tip
• Top Loaded Coil
• Non-Corrosive Chrome Plated Stainless Steel Hardware and Brass Ferrule
• Fits All 3/8 .in Threaded Mounts

• Expands one cigarette lighter socket to power 4 electronic items.
• Plugs into lighter socket.
• Fuse Protector
• Mounting hardware included

This item cannot be shipped to APO/FPO addresses.

This 49-inch center load trucker CB antenna has 3500 Watts of power handling capability. It also features a tunable design 1.6MHz bandwidth weather-band ready and solid 8-gauge 100% silver-plated wire for maximum efficiency. A 180-degree tip eliminates the need for a ball. Ultrasonically sealed housing.

Feature:

• 3500 watts AM power handling capability (ICAS)
• 49-inch 17-7 stainless steel whip antenna
• Frequency range 26-30MHz 1.6MHz bandwidth
• Ultrasonically sealed housing eliminates corrosion caused by water
• 1/4 Wave Length Design
• Weather-Band Ready
• 10 .in Shaft Length with 3/8 .in x 24 Threads and Tunable Design
• Solid 8-Gauge 100% Silver Plated Wire for Maximum Efficiency
• Radius 180 Degree Tip Eliminates Need for Ball

The 48-inch Hot Rod CB Antenna is rated at 150-Watts and made in the USA. 3|8 inch x 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long lasting antenna.

Feature:

• 48-inch in overall length 150-watts rated
• Traditional sleek style that reduces wind drag load
• Black double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 48-inch Hot Rod CB Antenna is rated at 150-watts and made in the USA. 3|8 inch x 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long lasting antenna.

Feature:

• 48-inches in overall length 150-watts rated
• Traditional sleek style that reduces wind drag load
• Orange double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 48-inch Hot Rod CB Antenna is rated at 150-wWatts and made in the USA. 3|8 inch x 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long lasting antenna.

Feature:

• 48-inches in overall length 150-watts rated
• Traditional sleek style that reduces wind drag load
• White double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

The 4-foot Superflex 1500-watt fiberglass antenna whip has 180-degree whip action capability and a Superflex quarter-inch fiberglass rod. The whip is tunable with a top loaded coil 1/4 wavelength design and Mil-Spec polyolefin sheath. It can be used as a single or co-phased antenna. Designed for CB and 10-meter radios.

Feature:

• 180 degree whip action capability
• Superflex quarter-inch fiberglass rod
• Designed for CB and 10 Meter Radios
• Frequency Range 26-30MHz
• Designed for CB and 10 Meter Radios
• 1/4 Wave Length Design
• Fits All 3/8 .in x 24 Threaded Mounts
• Chrome Plated Whip Adapter
• Mil-Spec Polyolefin Sheath

This 4-foot top-loaded coil 2500-watt replacement whip antenna has a black fade-resistant polyethylene jacket and heavy-duty 16-gauge wire. It handles up to 2500 watts and has a frequency range of 26MHz-30MHz. Also featuring a weather-band ready tunable PowerPlus tip and non-corrosive chrome-plated stainless steel hardware with brass ferrule. It can be used as a single or co-phase for dual antennas. Designed for CB and 10-meter radios.

Feature:

• Black fade resistant polyethylene jacket replacement whip
• Handles up to 2500 watts
• Can be used as a single antenna or co-phase for dual antennas
• Frequency range: 26-30MHz
• Weather-Band Ready
• Tunable PowerPlus Tip
• Top Loaded Coil
• Non-Corrosive Chrome Plated Stainless Steel Hardware and Brass Ferrule
• Fits All 3/8 .in Threaded Mounts

This extra heavy-duty mirror mount features a 3-way double groove mount for universal installations. It offers stainless-steel hardware heavy-duty studs and a 100% non-corrosive design.

Feature:

• 60mm chrome plated mount with extra heavy-duty stud
• 3-way double groove mount for universal installations
• Stainless-steel hardware
• 100% non-corrosive design